Monday, August 4, 2014

Trash to Treasure - Retro Chair

Tonight we finally got around to taking some pictures of the chair that I mentioned in the last couple posts. It's all finished, and Joe and I are quite happy with it. This really was a tag team effort between the two of us. Joe offered to take on the refinishing of the wood while I handled the re-upholstery of the seat and back. I'm not sure which of us had the more difficult job but I do know that we got the ones best suited to us :)


The story of this chair starts with me first spotting it at the end of someone's driveway on trash day. I actually drove by it in the morning while it was drizzling, and thought about stopping right then to pick it up. However I was already running late for work and thought that the rain might be ruining the wood. So I didn't pick it up then but instantly regretted it haha. I thought there would be no way that the chair would still be there when I was coming home, but lo and behold it was! This time I stopped and gave it a quick look over. Besides needing some love it seemed to be in good condition, and it passed my "shake test". Basically I tried to shake and wiggle the chair to check for structural stability. It was solid! So into the back of my car it went. This is the first piece of trash furniture that my new Subaru has had the honor of hauling :) When I got it home and showed Joe, he was of course less than thrilled that I had brought yet another piece of furniture into the house that needed work, but he did admit that it was a cool chair and that it seemed solid.


A quick background about this chair. It had a couple tags on the bottom that told me it was made by the Sikes Furniture Company in Buffalo, NY. There was not a date of manufacturing, but the model of the chair was 1954. I have no idea if that correlates to the year it was made, but maybe so. Another tag on the bottom let us know that the wood was walnut. I did a little research but couldn't find too much information about the Sikes Furniture Co. or the value of the chair. So we decided that we would keep the chair for ourselves once it was fixed up. I would call the style of this chair either "Danish Modern" or "Mid-Century Modern". As implied by the name, this style of furniture was made around the middle of the 20th century and was often modeled after Danish designs that used clean, modern lines, slim legs, solid wood, and minimal excess decoration. I'd say the defining characteristics that make this chair fall into that category are the interesting angles on the arm rests, the solid walnut frame and the brass tips on the narrow front legs. If curious about other examples of this style, just Google either of the terms above.

On to the makeover! It started with me removing the seat and back cushions which were conveniently attached with screws from the back and underside. Then I began the very tedious removal of hundreds of upholstery tacks. I had to pop each one up with a flat-head screwdriver then pull it out with some needle-nose pliers. You can kind of see in this picture how there were layers of fabric and piping that were tacked on on top of each other. Removing each layer revealed another row of tacks.



After removing all the old vinyl (or leather, I'm honestly not sure) covering I needed to check and see if the padding underneath was usable. I really wanted it to be so that I didn't have to bother replacing it. I veeerrrrry cautiously gave one of the cushions a little sniff and didn't smell anything. So I sniffed a little closer and a little more haha. Miraculously the padding didn't have any bad smells and I was able to keep it. It must have been sealed in really well under the vinyl all those years.

A couple weeks after that I finally got to work on recovering the cushions. I cut pieces big enough to wrap around the cushions with plenty of excess to pull on. I started out trying to just use a hand held staple gun but the wood base of the cushions was so hard that the staples wouldn't go in all the way. After trying to hammer a few of them in the rest of the way and failing miserably, I decided to consider getting a pneumatic upholstery stapler to use with our air compressor. We found one on Amazon for $25 and it was the best money we've spent on a tool in a long time! At least as far as I'm concerned. It made the rest of the upholstery job so easy. I still used the hand held staple gun to kind of tack the fabric in place since it was very simple remove those if I needed to re-position the fabric. While re-covering the cushions I tried to keep a couple things in mind. First, keeping the fabric centered on the chair and second, pulling the fabric very tight so that there wouldn't be any wrinkles on the finished top. I think I was pretty successful!

First I covered each cushion with the main top piece of fabric.



Then I sewed a bunch of piping to use around the entire seat cushion and the top of the back cushion. Once that was made, I was able to attach it using the air stapler as well.

When stapling the piping around corners I snipped some notches into the fabric to reduce the bulk at the corner. 

Only the top edge of the chair back needed piping. 

The back of the chair back also had to be covered with the main fabric since it shows through the back of the chair frame. I had to attach the top edge of that first from underneath so that the staples would be hidden. I did it very similar to the how the old backing was attached which you can see in one of the old pictures above. For the bottom of the seat I used a coordinating piece of fabric from my stash to cover everything and give it a nice finished look.

While I was working on all the upholstery, Joe took care of the chair frame. When he started there were lots of areas that had surface staining, scratches and gouges.


He started the re-finishing process by hand sanding the entire frame with 80 grit sandpaper. Then he moved on to 120, 180 and finally 220 grit. The difference when he was done sanding was amazing!



The wood looked awesome and I could start to see the beauty of the finished product. After sanding he did a little research on how to finish the wood. Options include, polyurethane, lacquer, wax, oil, and who knows what else. We decided to use Danish Oil which is a common finish for mid-century modern furniture. The dry wood really soaked up the oil and Joe ended up applying a few coats over about a week or so.


I loved seeing the beautiful grain of the walnut shine through!


The final step in the makeover was to polish up the brass tips on the front legs. To do that I just used some Brasso and old t-shirts scraps. They polished up pretty nice. Now for some finished pictures of the chair.

A little detail of the cool fabric I found. 

Here you can kind of see how I covered the bottom of the seat to hide all the edges of the stapled fabric. 

As you can see I didn't quite get the fabric super smooth along the edge of the seat but I'm still happy with it. 

Here you can see the cool flared arm detail.


Sorry for the picture overload but I'm just happy to share it I guess. I hope you all had a fun weekend and are enjoying the last few weeks of summer. I've got one more furniture makeover in progress that will hopefully be done soon if my sewing machine will cooperate. In the mean time I'm hoping to share a couple recipes this week. Until next time, have a great night!

Thursday, July 31, 2014

DIY X-Side Planters

Tonight I'm finally getting around to showing you some awesome planters that Joe made for us earlier this summer. I had flagged the idea for the planters on a blog called Centsational Girl over a year ago with plans to have Joe make a couple to place on the deck on either side of the sliding door. After building the nice new deck last year, and the table earlier this spring, we decided that it would be a good time to make the planters. Joe took a look at the pictures from Centsational Girl then drew up his own plans for ours. Ours are made with pressure-treated pine boards that are more rot resistant, and once they have had time to completely dry out we plan on painting these with a semi-solid colored stain to help them stand out a bit from the deck boards.

One planter is filled with lavender and rosemary, and the other has parsley, basil, and mint. I love having all these herbs right outside our door! And the plants are much happier than they were in smaller pots on the window sill.
 

The material list to make one is this:
  • One 1 lb box of 1 1/4 inch exterior screws
  • Four 8ft pressure treated 1x6s
  • One 8ft pressure treated 1x4
  • One 8ft pressure treated 2x2
  • One 6ft pressure treated 1x6 fence picket (rough cut)
  • One sheet of pressure treated privacy lattice (the kind with the tighter weave)
  • Landscape fabric

Some of this we already had on hand from other projects, but if you were to buy these materials, Joe estimates that it would cost between $30 an $40.

So the first step is to cut all the lumber to size. This requires some rip cuts, which are much easier with a table saw. Much to Joe's chagrin, he does not have one. But we do have a Kreg rip cut jig that attaches to a circular saw, and it worked out just fine. Here are the cuts you'll start with:
  1. Rip the 1x4 and one of the 8ft 1x6 boards in half
  2. Cut the remaining three 8ft 1x6 boards into four 20" sections each (you'll have about 16" left over, but save these...we'll use them later!)
  3. Cut the 2x2 into four 2ft pieces


Once you have these cuts made, set one of the 20" sections from each of the three boards together and measure their width. This will make the sides of our planter. Take this width and cut the ripped 1x6 board into eight pieces that are this length. Ours were about 17.5" long.



The next step is to start assembling the frame of the planter. To do this, Joe first used our Kreg Jig Jr to make two pocket holes in each end of the pieces of the ripped 1x6. With the pocket holes drilled, Joe used some of our larger clamps to hold two of the pocket holed pieces between two of the cut 2x2s. One of the boards is lined up with the top of the 2x2s, and the other is placed so that it is 4 inches from the other end of the 2x2s. Then you drive screws into the pocket holes to attach it all together.




Repeat this process to make the other side of the frame, and then you attach the two sides together using a similar process. Now you have a frame! Time to fill in the rest.



Use three of the 20" long pieces of 1x6 for each side and attach them to the inside. You'll want to start the screws from the inside so the heads don't show on the outside. Joe pre-drilled two holes at the top and bottom before attaching them with screws. Do this for all four sides.



Now the fun/hard part! Making the Xs on each side. These are made by making angle cuts on the ripped 1x4 pieces from earlier. One thing you'll notice is that since each side isn't a perfect square, you can't just use the 45 degree mark on the miter saw to cut the ends. Joe being Joe needed to figure out EXACTLY what the angle was and how long each piece had to be. He worked out the math and plugged the equation into his trusty TI-83 calculator to find his answer. He was oddly proud of this part of the project... You could probably just measure it and estimate the length and angle to get close enough :)


Cut the ripped 1x4 pieces into 8 pieces of the appropriate length and the correct angle. Place four of them in each side to represent half of the X for those sides. Then cut the remaining four pieces into two pieces so that they fit into the other two corners to make the X!


Once you have the Xs set into each side, Joe used painters tape to hold them in place. The reason for this is because he wanted to fasten them from the inside of the planter so there weren't screw heads showing. Once the Xs are taped in place, you can set the planter on its side and attach them with screws.



With the sides finished, it's time to finish up the inside of the planter. The planter needs to have a bottom to hold the soil after all! To do this, use the leftover pieces of 1x6 boards to create a ledge on the inside of two of the sides. You should have just the right length of pieces for this from your earlier cuts (hooray reusing scraps!). Then cut the rough-cut 1x6 board into pieces that will rest on those two ledges and screw them in place. We ended up using 1x6 fence boards and a piece of 2x4 because we had them on hand as left-overs from some compost bins Joe made, but you could really use just about anything you want.


The next thing to do is to make a ledge to go around the top. This isn't necessary, but Joe liked that it covered the exposed ends of the planter's side boards. These are simple 45 degree cuts that are then screwed in from the top. No TI-83 calculator required!


Almost there! One thing that Joe did that we haven't seen on other plans was that he used pressure-treated lattice to line the inside of the planter. Then he put a good, thick landscape fabric over the lattice. The purpose of the lattice is to keep the soil out of contact with the planter sides so they can air out. Hopefully this helps them resist rotting and last a lot longer! He just used a staple gun to hold the lattice and landscape fabric in place.



And there you go! Now you have a beautiful and sturdy planter ready to be filled up with soil and some fun herbs or flowers.


Well that was a lengthy post but if you should ever decide to build some planters like these, you now have some good guidelines :) I That's it for tonight, have a great weekend!

Sunday, July 27, 2014

Flower Petal Wedding Cake

Hi there! I'm back with more cakes. I spent the better half of last week and most of the day yesterday working on these cakes. It was a lot of work but I'm happy to say that they worked out mostly as I had planned with very few hiccups. Originally the order was just for a wedding cake, but a couple months ago the groom's parents contacted me to see if it would be possible for me to also make a groom's cake for the rehearsal dinner. I told them, "Of course!", while wondering how exactly I'd pull both cakes off in one weekend haha. Since the rehearsal dinner was on a Friday night, I knew I'd have to have it completely decorated and ready by Thursday night. That meant baking everything on Wednesday.

By the time I went to bed on Wednesday night, our fridge was filled to the brim with all the layers needed for a 2 tier groom's cake, 3 tier wedding cake, and an additional sheet cake for the wedding. After a cake order like this, Joe and I are looking into getting a 2nd refrigerator for the basement :)

The other part of these cakes that I needed to get started on ahead of time was making all of the gum-paste flower petals that were needed to decorate the wedding cake. This was something completely new for me and after watching a few tutorial videos online and some trial and error I was finally able to make a passable flower petal. In the picture below you can see what I rigged up to dry the petals with. Just regular muffin tins with foil pressed into each of the cups. It worked really well and I did the same thing with with a mini-muffin tin for some of the smaller petals. I made all of these petals on Thursday night so that they would have time to dry before using them on Saturday.


Pretty petals :)

On to the groom's cake! The design was simple, but it's is surprisingly difficult for me to make straight lines while piping on the icing. In an effort to make the straightest and most evenly spaced lines as possible around the cake, I first marked off the bottom of the cake into 1" increments then used my bench scraper to mark the lines at each tick mark. It was quick and easy! But as you can see in the final cake, my final vertical icing lines were still a little shaky. For all the little dots between the lines I just eyeballed the spacing.


I also found that making chocolate curls is not as simple as you would think. 

I have to say, getting smooth sides and sharp corners on the hexagon cake was definitely more difficult than on a round cake. But with the help of the edge icing on the cake it turned out looking pretty nice. At least I think so :) I delivered and set up the cake on Friday evening after work then went home and got to work on the wedding cake.


The wedding cake itself was a super simple design. Just smooth white fondant on all the tiers. The slightly more difficult part was figuring out the arrangement and attaching all the flower petals. Since I transport the cake tiers while they're still un-stacked, I couldn't attach all of the flowers ahead of time at home. I did attach a few with the plan to fill in all the gaps once I got the cake set up at the venue.

Here you can see what the seams between the tiers looked like before filling them with icing. The icing definitely makes a big difference!


I used royal icing to "glue" the petals to the cake and it seemed to work well. Since I stuck the majority of the petals on at the venue, most of them were still drying when we left. I was just praying that no one would knock  the table or touch the cake before it was time to cut it. That's pretty much my worst wedding cake nightmare, that something will happen to the cake between the time that I get it set up and when the bride and groom get there and cut the cake. So far so good though!



My final comment about this cake is that I finally "caulked" the seams between the layers with some icing to fill the gap and make it look nicer overall. That was for you, Mary :) Though I have to give Joe credit for it since he's the one who told me I should bring the icing along just in case. So, thanks Joe!


I've got a couple months before another big wedding cake weekend. Between now and then I'm hoping to finish a few little projects I have going on around the house. This weekend, Joe and I made good progress on making over my latest curbside trash find. I found a really cool chair with a wood frame and upholstered seat and back that was really sturdy but just needed some love. Joe is refinishing the frame and I'm doing the upholstery update. So far it's looking really good! Hopefully by next weekend I'll be ready to share it on the blog. That's it for tonight though! Have a good week.